Tag Archives: VCT

Fear of Frying!

Fear of Frying!
by Ron Call

Many times through the years as I’m measuring a customer’s home for new flooring the same question arises time after time.  I think I might want hardwood in my kitchen but I’m afraid of it getting wet.  There are many factors to consider when choosing new flooring such as cost, appearance, wear etc.  Each type of flooring whether choosing wood, laminate, tile, sheet vinyl or vinyl composite tile (VCT) all have advantages as well as drawbacks.

Ron Call, your Urbanfloor Guy

Tile is hard under the foot when standing and cooking and is cold on your feet when you’re making your morning coffee at 6 am.  If the rest of your home and adjacent areas like your dining room or breakfast nook have beautiful hardwood, using sheet vinyl or VCT will probably detract from the overall look of your home.  Have no fear; I’ve installed hundreds of kitchens with great success.  Here are a few things to keep in mind when your floor is being installed. Make sure your contractor fills the entire perimeter (expansion gap) at cabinets behind the refrigerator and around islands with flexible clear silicone.  This will prevent spilled water from getting underneath your floating floor or you’re glued down floor.  Even a major spill can be mopped up before you can do much damage.  Also never use inexpensive water based adhesive to glue down your hardwood floor in possible wet areas.  Use a good urethane adhesive like Urban Four.  I’ve seen glued down engineered floors completely flooded that once dried sustained no visible damage.  Also if you’re a do-it-yourselfer and you’re planning on using one of the new glue less fold and lock floating floors in your home just use a little waterproof Titebond wood adhesive in the tongue and groove when you’re installing in the kitchen.  This will prevent topical spills from seeping between the planks giving you time to mop up the spill.  Lastly make sure you have a couple left over boxes of the original wood stored away in your home in case a few planks need replacing.  Bon appetit..

Ron Call’s Tip of the Week #010- Asbestos Safety When Installing Your Hardwood Floors

Tip of the Week
Saturday, May 26, 2012
by Ron Call, your Urbanfloor guy

Ron Call, your Urbanfloor Guy

DYI tip of the week.  If you’re planning on installing your own floor either gluing direct, nailing or using the floating method one thing you might not have considered especially if you have an older home built before the late 1980′s is asbestos.

A lot of these homes were originally built using base grade VAT (Vinyl Asbestos Tile) as a floor covering.  You may still be walking on it today, or it may be hidden under the carpet or vinyl flooring you are thinking about replacing.  In any case if the tiles on your floor are 9″ x 9″ or are secured by an adhesive that looks like black tar, there is a real good chance that it contains asbestos. Both the tiles and the adhesive may contain asbestos.

Asbestos is a known carcinogen that can cause cancer.  You should NOT attempt to remove or alter this tile or adhesive in any way.  It is against Federal Law and you may possibly contaminate your home.  The problem is not that it is in your home, as long as it remains undisturbed it will not cause any health concerns.  The problems can come from the improper removal and disposal.

If you were planning a glued direct method, you will need to find a certified asbestos abatement contractor to properly remove and dispose of the tile and the adhesive residue.  Even disposing of the tile in a regular land fill is against the law, so do not attempt to do this yourself.  You are risking your families health and major fines if you are caught.  Now if you find that you have this in your home you can still install your new floor without removal if you use the floating method.

If your floor is flat with in a tolerance (see the specs that came with your floor) just install right over the tiles. You can use a good self-leveling concrete patch to fill any low spots (just go right over the tiles).  If you have any high spots that need grinding, STOP and contact your certified asbestos abatement contractor.

If you improperly try to grind the high spots you WILL contaminate your home and put your family at risk.  If you are not sure if your flooring contains asbestos, for safety sake just assume that it does.  You can have it tested for about $50.00 depending on the area of the country you live in.  It is almost always impossible to tell the difference between VAT (Vinyl Asbestos Tile) and VCT (Vinyl Composite Tile).  If you have your certified abatement contractor remove the tiles and adhesive residue for you, be sure he gives you a Clean Air Certificate upon completion.  This will certify that your home is safe to occupy and the air safe to breath.  Once this is done install away…

Have questions about a project you’re working on?  Need advice?  For answers post a comment below or visit the Ask Ron page HERE

Plugin from the creators of Brindes Personalizados :: More at Plulz Wordpress Plugins