Category Archives: Architecture

Why Choose Hardwood?

Let’s get basic! Why not? You’re on our page because you might be considering installing wood flooring into your home. Awesome thought. Now let’s learn a little about how wood floors can benefit your home, family, and life! First off, wood floors reveal a sense of elegance when entering a home. They immediately project comfort and style along with a right-at-home feeling.  Because wood floors are natural, they bring a positive environmental factor right into your home.  A great thing about wood floors is that there are so many styles to choose from to match any type of décor.  Every different type of wood has a unique style, design, texture, and color. The options are almost limitless when it comes to customizing your dream floor. Because hardwood is top-notch quality, your home will always stay beautiful as long as the right maintenance is put into keeping your floors the same quality as if they were just bought!

Hardwood lasts for decades. There is no doubt that it reminds sustainable for many years. It is fairly easy to maintain also. Dust mopping on a regular basis will keep your floors looking new as well as the occasional approved cleanser. For those who love to go green, wood flooring has tremendous environmental benefits. Wood floors use less water and energy to produce than other possible flooring options such as laminate or tile. Although they last hundreds of years, the flooring can be recycled! Indoor air quality is even improved when hardwood is installed. Your health will begin to see benefits from your wood floor too. Dust, mold, mites, and dirt build up on carpets, irritating colds, allergies, and other health problems. Allergy sufferers find many pros when it comes to wood floors because of the improvement in air quality.We all know wood flooring is quite an investment. Even though this is true, it is ultimately a great long term investment because it increases the value of your property and adds a beautiful charm to the overall feeling and appearance of your home.
url-4

How to Install a Hardwood Floor

DIY experts take us step-by-step to help install beautiful wood floors

Step 1: Choose the Boards

Choose the hardwood species and board widths for the room installation.

Step 2: Measure the Room

Measure the width and length of the room and multiply for the square footage. When ordering hardwood flooring, allow 10-15 percent extra for irregular boards and any cutting mistake.

Step 3: Check for a Squeaky Floor

Check the sub-floor. Minimum requirements are a 3/4″ plywood sub-floor. Make sure there are no squeaks in the floor. If there’s a squeak, screw a long drywall screw into the sub-floor and joist where the squeak occurs. Remove shoe-molding from the room and sweep and clean thoroughly.

Step 4: Roll Out the Vapor Barrier Paper

Roll out strips of vapor barrier paper, allowing at least a 4″ overlap and staple securely to the sub-floor. Use 15 pound tar paper or felt. It is relatively inexpensive (it’s approximately $12 a roll at a home improvement store). Mark with a pencil along the baseboards where the joists are located.

Step 5: Start Installation

Start the installation at the longest unobstructed wall. Remove the shoe molding, and snap a chalk line 3/8″ out from the baseboard (this allows for expansion in the hot, humid weather and contraction in the colder, drier weather of the hardwood flooring).

Step 6: Place the Boards

Begin by selecting a long board to start the first row. Pick one that is straight. Align the edge of the board with the chalk line and drill pilot holes down through the hardwood plank and into the sub-floor and joist. Face-nail each board at the point of every joist and set the nail with a nail-set. Face-nail the entire first row and remember to keep the board lengths random. It is important to face-nail the first row because the pneumatic nail can’t get down in there. It will hit the wall and the force would push the wood against the baseboard, which would lose the 3/8″ expansion and contraction.

It is important to lay the first boards perpendicular to the joists which are underneath. That is important because you want a nice solid anchor. Look at the subfloor to see which way the nails and seams ran. Try to go underneath the crawl space to see how they run.

Step 7: Hand-Nail the Rolls

After the first few rows have been installed, drill pilot holes down into the tongue of each board and hand-nail the rolls until there is enough clearance for the pneumatic nail gun.

Tip: Lay out a box of hardwood boards ahead of the installation to visualize lengths, wood grain and colors of the boards. When laying out the boards, keep in mind to never have the ends of boards in adjacent rows line up with each other. Keep the lengths random and at least 6″ in length.

Step 8: Staple the Boards

Using the pneumatic nail gun, place the gun lip over the edge of the board and strike firmly with the mallet, driving the staple into the tongue of the hardwood plank.

When installing up to a threshold, it is not critical to make cuts exact. Come back later after the floor has been installed and use a circular saw to cut across for a precise cut.

use pneumatic nail gun to staple tongue into plank

Step 9: Cutting the Baseboard

When cutting along the baseboards, select a piece that will fit in there and leave 10 or 12 inches more and cut it off. Use the other piece on the beginning of the next row. You don’t always have to get it in there real close and throw out the end piece. That will save some time and waste.

use cut off boards from one row to start next row

Step 10: Fill in the Gaps

Be sensitive to the way the ends fit together. One end has a tongue and the other end has a groove — this is called end matched. Make sure to always cut the wall end of the wood so that you do not cut off the groove that fits to the tongue. If that happens, that would result in a pretty big gap. Find a piece and lay it alongside the hole and flip it over. Make sure when you make the mark to cut off the wall side, not the room side. When you make the mark, butt it up against the baseboard and then mark at the end of that tongue. That will leave a 3/8″ gap for expansion and contraction when installing the piece.

Note: Before nailing, make sure to put at least two nails in every board. The rule of thumb is to place a nail every 10″ to 12″.

Step 11: Work Around Clearance Issue

As you near the opposite wall, clearance for the pneumatic nail gun again becomes an issue. Drill pilot holes and hand-nail the boards until there is no longer clearance for the drill and hammer. At that point, drill pilot holes down into the top of the boards and face-nail the boards, remembering to set the nails with a nail-set.

Tip: Use a pry bar and a few extra scraps of flooring to firmly seat the hardwood plank as you nail.

Step 12: Fit Last Board Into Place

If there’s a narrow gap for the last board, take a measurement and rip (cut length-wise) the last board to fit into place. Remember to leave a 3/8″ gap at the end wall for expansion and contraction space.

Step 13: Fill Holes With Wood Putty

Replace shoe molding in the room and putty all of the nail holes that have been face-nailed. Be sure to get wood putty that matches the floor. Fill the hole and wipe off the excess.

Step 14: Hardwood Floor Maintenance

Maintenance is easy for a pre-finished hardwood floor — keep grit off of the surface by sweeping regularly and use a flooring cleaning kit (alcohol-based) and spray on and wipe off with a damp cloth. Hardwood floors also help cut down on dust mites.

See more pictures and examples at http://bit.ly/129zwQu

How to Create a Built-in-Bookshelf

As we all know, flooring has numerous factors that complement color, shade, the type of wood, and more. Design, care, and maintenance are just a few aspects that go hand-in-hand with the flooring that you choose. Decoration and color are key factors to a wonderful, breathtaking room.  Sometimes these additions can become expensive. Why not create a decoration yourselfurl-10? Many might be thinking– where is my talent and money that must go into this process? No need to worry. Following a few steps will help create a decoration or addition that you have always wanted. Today we are going to discuss a popular trend that is seen in many living rooms and bedrooms..Built-in bookshelves! In my opinion, I believe these are great for show, and for also saving space on a regular bookshelf. The trick is a 12-step process that will bring you from scattered supplies to a magnificent creation. After-all, if you can read, you can build!

One,  you need to measure and cut the shelving. Measure the shelves in relation to the space you will be inserting them.  Cut the pieces of shelving and using a circular saw, cut out the kick-plate area on the bottom of the unit.

Two, you must cut rabbet joints into the ends of the top shelf, cutting straight across the shelf into 1/8’’ increments

Three,  “Mark the location for the center shelf, and use the pegboard as a template for drilling holes for adjustable shelves. Clamp the pegboard in place so that the first holes will be 4″ above and 4″ below the center shelf. Draw reference lines across the holes in the pegboard to help you keep the holes even. Drill holes 2″ from the edge in 2″ increments.”

Four, attach 1’’x 2’’ support blocks for the center shelf with glue and finish nails. “Drill and countersink pilot holes for the top of the bookshelf. Attach it with glue and 2″ wood screws. Apply wood glue to the support blocks for the center shelf, and set the shelf in position. Drill and countersink pilot holes in the side of the bookshelf, and attach the shelf with 2″ wood screws (Image 2). Be sure to drill the holes in an area that will be covered when the bookshelf is recessed into the wall”.

Five, attach support blocks for the bottom shelf with glue and nails

Six, Fasten the back panel with 1’’ brads to help the shelf stay square

Seven, “Attach 1″ x 2″ trim pieces to the side and bottom edges of the bookshelf with sixpenny nails and glue”.

Eight, “Drill and countersink pilot holes for the kick plate so the screw heads will be just below the surface of the wood. Attach the kick plate, then cover the screw heads with wood filler or spackling compound.”

Nine, remove any base molding from where the shelf will be placed

Ten, drill pilot holes through the back corner and into the wall studs—be careful not to drill through the inside of the bookshelf.

Eleven, “Measure and cut the nailer board and trim for the top of the bookshelf. Attach the nailer to the top of the shelf with sixpenny finish nails. Use finish nails to attach the trim”.

And finally, replace the baseboard trim and touch up any areas that need adjustment.

See photos and tips for guidance on http://bit.ly/12CHela

What Does the LEED after my name mean?

Denise Colestock, LEED A.P. BD+C

Denise is one of the newest members of Team Urban and has a background in design and architecture with an emphasis in sustainable design.  In her free time she enjoys hiking, paddle boarding, traveling, reading, running and yoga- usually with her active toddler in tow.  Denise even has her own urban farm which satisfies her passion for local, healthy eating- and introducing her son early to nature in its purest form.

What Does the LEED after my name mean?

By Denise Colestock, LEED A.P. BD+C

As the newest member of the Urban Floor team, I am excited to share my knowledge and passion for sustainable design with our clients and colleagues.  The credentials after my name, LEED BD+C, mean that I am a LEED Accredited Professional and have passed an exam that allows me to design environmentally friendly buildings using strict codes and guidelines that lead to efficient buildings.

LEED stands for Leadership in Energy and Environmental Design and is redefining the way our built environments are designed, constructed and operated.  Factors that are considered when creating a LEED building include sustainable site development, water savings, energy efficiency, materials selection and indoor environmental quality.  This rating system can be used for commercial buildings as well as for residential homes and neighborhoods as a whole, and is constantly aimed at achieving high performance in human and environmental health.

With a background in design and architecture, I am excited to bring the latest news and trends to the Urban Floor team when it comes to flooring design and sustainable building technologies. To learn more about the LEED system, please visit www.usgbc.org.  Also feel free to contact me directly at denise@urbanfloor.com if you have any questions regarding environmentally friendly design.

Art Collectors & Former Gallery Owners Make Art of Their Home

Info Source: ArchDaily
Architects: Fernau + Hartman Architects
Location: , CA, USA
Architectural Team: Richard Fernau, Laura Hartman, Laura Boutelle, Jenee Anzelone, Kate Lydon, Jason Wilkinson, Luc Johnston
Project Year: 2010
Photographs: Richard Barnes & Marion Brenner
Landscape Architect: Pamela Burton & Company
Contractor: Jim Quick, Coastal Builder, Inc.
Mechanical: Lee Falkenstern, LDF Engineering, Inc.
Structural: Craig Dobbs
Civil: Penfield & Smith
Electrical/Lighting: JMPE Electrical Engineering + Lighting Design

In the Santa Ynez Valley in California a beautiful home was designed by architecture firm Fernau & Hartman Architects.  Their clients, one of which works as a visual artist and both are avid art collectors and former gallery owners wanted a home that incorporated energy-efficiency as well as a complimenting harmony with the rural landscape and Mediterranean climate of the area.  As I’m sure you have noticed above from the significant resources it certainly takes a reputable team to bring projects like this to life.  Certainly not like going to a planned neighborhood and just choosing one of three plans.  This is custom all the way and the talents of everyone involved certainly show it.  The design of the home compliments the surrounding landscape.  Well thought out and planned!

Photo Credit © Richard Barnes

 

Photo Credit © Marion Brenner

Want to see more of this magnificent home and get more details on the brilliant design elements from the inside-out?  Visit ArchDaily HERE

Plugin from the creators of Brindes Personalizados :: More at Plulz Wordpress Plugins